Pewag RGS High-Strength Eyebolt for Lifting Applications – Metric Thread – 400kg to 18 Tonne WLL
PEW-EB-RGS
The Pewag RGS Eyebolt is a high-strength lifting eye designed for safe attachment to machine parts and steel components. Offering reliable working load limits for single- and multi-leg lifting, it provides a durable and cost-effective lifting solution for industrial applications.
Price on request
Description
The Pewag RGS High-Strength Eyebolt is a robust and versatile lifting point designed for lifting, handling and positioning machine parts and steel components. Manufactured to strict quality standards, the RGS eyebolt provides a dependable anchorage point for use with chains, slings and other approved lifting equipment.
Designed for direct installation into threaded holes, the Pewag RGS eyebolt is ideally suited for applications where a simple, fixed lifting eye is required. When correctly installed, it enables safe and efficient lifting in single-leg or two-leg configurations, provided the stated working load limits and loading conditions are observed.
The RGS eyebolt range covers a wide selection of thread sizes, from M6 up to M64, with working load limits ranging from 200 kg to 36,000 kg for single-leg vertical lifts, and proportionally higher capacities for symmetrical two-leg lifts at 0°. This makes the RGS series suitable for everything from light-duty machine components to heavy industrial fabrications.
Each eyebolt is manufactured from high-strength steel and clearly marked with its size and load rating, ensuring quick identification and safe selection on site. The simple, compact design allows easy installation while maintaining a strong and secure load path directly into the base material.
The Pewag RGS eyebolt is intended for straight-line lifting applications and must be mounted fully seated against the load surface, with sufficient thread engagement to safely absorb the applied forces. It is widely used in manufacturing, machinery installation, maintenance operations and general industrial lifting where reliability and simplicity are key requirements.
Safety & User Instructions
Only trained and competent personnel may use this product.
Always ensure the eyebolt is fully seated and tightened against the load surface.
Use only in the permitted lifting directions and configurations.
Do not exceed the stated working load limits.
Avoid angular loading unless specifically permitted.
Do not use if the eyebolt is worn, deformed, cracked or corroded.
Never stand beneath suspended loads.
Inspect before each use and remove from service if damage is detected.
Installation Notes
Ensure the threaded hole is clean, dry and free from damage.
The eyebolt must be screwed fully home so that it sits flush against the load surface.
Adequate thread engagement must be provided based on the base material.
The direction of pull should be aligned with the axis of the eyebolt wherever possible.
Technical Overview
Thread sizes: M8 to M
Single-leg WLL (0°): 400 kg to 18,000 kg
Two-leg WLL (0°): Up to 36,000 kg (depending on size)
Application: Lifting eye for machine parts and steel components
Material: High-strength steel
Technical information
| Weight | N/A |
|---|
